How do I fix code P0732?

How do I fix code P0732?

How To Correct P0732 Gear 2 Incorrect Ratio

  1. Refill of Low transmission fluid level.
  2. Dirty transmission fluid to be changed.
  3. Faulty Shift Solenoids Replacement.
  4. Repair or replace Shift Solenoids harness which is open or shorted.
  5. Faulty Shift Solenoids circuit, electrical connection repair/replace.

What does P0732 mean?

Code P0732 When the code P0732 is set in the Powertrain Computer, it means that the Powertrain Computer or PCM is seeing a greater than a specified RPM difference between the rotational speed of the Input RPM Sensor and the Transmission Output RPM Sensor when the vehicle is in 2nd gear.

What causes incorrect gear ratio?

The incorrect gear ratio code may have several causes: Bad or dirty fluid in the transmission. Low fluid in the transmission. Broken mechanical components within transmission.

Can a clogged transmission filter cause shifting problems?

Shifting Issues When the transmission fluid isn’t clean or is blocked by a clogged filter, the internal components won’t have the lubrication they require to function properly. This could lead to shifting issues, grinding gears, slipping transmission or other common symptoms of transmission problems.

What is po732 code?

What the P0732 code means. A P0732 refers to an issue in the vehicle’s automatic transmission. According to the code, Gear 2 will have been detected by the PCM as having an abnormal gearshift ratio compared to the manufacturer’s default standard.

What is the OBD2 code for a Kia?

OBDII Kia Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.

What are the trouble codes for Kia cars?

Kia Codes; Trouble Code Fault Location Probable Cause; P1000 – P1099 (Fuel and air metering and auxiliary emission control) P1000: System diagnosis incomplete: Drive cycle incomplete, ECM: P1100 – P1199 (Fuel and air metering) P1100: Manifold absolute pressure (MAP) sensor- for EGR system – circuit malfunction: Wiring, MAP sensor: P1102

What does the p0733 code on a car mean?

What the P0733 code means. The P0733 code means that the powertrain control module (PCM) has detected something unusual with the ratio of the third gear in the vehicle’s transmission. This will usually have to happen multiple times before a trouble code will be stored.

What is the trouble code on a 1995 Kia Sportage?

TEST and ground terminals. On 1995 Sportage models, turn ignition to On, but do not start engine. On other models, start and warm engine, then run at 2,000 RPM for 3 minutes. Diagnostic trouble codes will be displayed as a series of long and short flashes on the malfunction indicator lamp (MIL).